|
goblinair (December 31, 1969 at 6:59 pm)
I was following your posts awhile back but then I got married and work got really crazy. I'm the one from manhattan who put tin foil on my roof and ran phone wire to the top. What's strange is that i haven't been able to produce very good results when trying this again. Can you bring me up to speed on what i need to get enough voltage and current to actually light up an led or something. The results i achieved were about 1.8 volts but only about 10 to 20 uA at very most.. not enough..
rocism001 (December 31, 1969 at 6:59 pm)
"revision of my post"T HEnry MOray..used a wire (14gauge) about 100ft long with a slight sag to it...he didn't use a plate and he had the most sophisticated well documented device ever built in the field...Tesla indeed discovered and proved it was possible ,but he never gave any power ratings..Moray on the other hand built his device and said and documented very well that it produced 50,000 watts...at another time it was said to produce 250,000 volts of high frequency energy ..
rocism001 (December 31, 1969 at 6:59 pm)
T HEnry MOray..used a wire (14gauge) about 100ft long with a slight sag to it...he didn't use a plate and he had the most sophisticated well documented device ever built in the field...Telsa indeed discovered and proved it was possible ,but he gave any power ratings..Moray on the other hand built his device and said and documented that it produced 50,000 watts...at another time it was said to produce 250,000 volts of high frequency energy
rocism001 (December 31, 1969 at 6:59 pm)
i will keep you updated...
rocism001 (December 31, 1969 at 6:59 pm)
ok thank you for your input...i am in the process of developing my own device...and for my first device it is going to be a bit on the complicated side and large scale..
rocism001 (December 31, 1969 at 6:59 pm)
it will be more like a box 24inches long x 18inches wide and about 20 inches high containing my circuitry...what i envision is ...with what i am buiding you can unhook the mains from the power company and hook them up to my box...and PRESTO...no more utility bill....i will post a video of it when i am done so that others can see... i am done buiding thew components and will soon start assembly...
IYANDIY (December 31, 1969 at 6:59 pm)
in parrallel, or series, aha!thanks for the knowledge of the variables, i understand them a little now. and looking forward to producing one myself, keep at it! its an important and fascinating subject, surely we cant be far from free usable evergy with tesla's legacies to be built, and built on. i saw a antennea type radiant energy device using a long wire instead of a plate, does the plate,or wire have a particular strength over the other, like the plate produces more voltage than a wire??
boxa888 (December 31, 1969 at 6:59 pm)
now with a higher capacitance , the energy should charge alot faster, thats what it seemed when i was using a larger capacity. i have just gotten a really high voltage capacitor and should test it. like i said i stopped testing this for a while cause im busy and stuff, maybe ill start doing things again. thanks for keeping interest in this topic.
boxa888 (December 31, 1969 at 6:59 pm)
sorry rocism, sometimes i miss comments. well i havent tested the device for a while, but a high capacity capacitor is probably better like your saying here. the voltage is like higher as you get higher in the air, the current part is increased with plate area, the deeper the grounding rod, the better, a few inches on the surface isnt enough yea 4ft-8ft is probably good enough to start seeing really good results. a very unsure guess would be, a higher voltage between 6 volts-50 volts maybe
rocism001 (December 31, 1969 at 6:59 pm)
i meant to say.."what kind of power rating would you give for a 40 ft high antannea with a Capacitor that is rated for 25,000 V, and a ground connection about 4ft-8ft deep...???what do you think ...??? please get back to me with your input... |
