|
legndznvrdie (May 17, 2008 at 1:55 am)
ITS BY IT
mpn1990 (May 17, 2008 at 1:50 am)
No, it doesn't. So how can three be plugged into the back? Is it plugged into a little box that leads a cable wire into the TV?
legndznvrdie (May 17, 2008 at 1:49 am)
there is no input or video button on the tv it only has MENU CHAN ^ CHAN DWN VOLUME ^ VOLUME DWN AND POWER . DOES YOUR TV HAVE THE INPUT OR VIDEO ON THE TV??
mpn1990 (May 17, 2008 at 1:45 am)
It should be a video mode then, not the channels. I don't know why it's not doing anything when you select it. Try the button for "video" or "input" on the TV itself.
legndznvrdie (May 17, 2008 at 1:40 am)
three plugged into the back
mpn1990 (May 17, 2008 at 1:39 am)
Is the console hooked up to your TV set with the one cable wire, or are three wired plugged right into the back of the TV?
legndznvrdie (May 17, 2008 at 1:36 am)
i tried the channels and still nothing
mpn1990 (May 17, 2008 at 1:35 am)
You must have it plugged in with an RF modulator then, which is the one cable wire instead of the three wires going directly into the TV. This model of TV only has a coaxial cable input on the back, nothing else.Tune the TV to either channel three or channel four, then turn on the console.
legndznvrdie (May 17, 2008 at 1:32 am)
its not on the tv though its the exact tv as yours and i press the tv/video button on my remote but nothing happens
mpn1990 (May 17, 2008 at 1:29 am)
You mean to play it?Turn it on and press either "input" or "video" on your TV. If you're using component wires, look for a "component" or "YPbPr" mode. |
