|
lpcrooks11 (July 23, 2008 at 9:43 am)
lol
darkrashan (July 23, 2008 at 5:01 am)
I think you can get brighter bulbs - you'll have to look up the manufacturer's specs..also the mirror thing up top might be a bit dirty (or even the LCD)
darkrashan (July 23, 2008 at 5:00 am)
you need an svga/DVI converter box...basically this is setup to ONLY hook up to a pc..You can buy a converter box to plug your console into it, or get a video capture card for your computer.Basically anything that lets you "play your console on a pc monitor" will work, as this projector *IS* a pc monitorcould be apple too i suppose :P
HughieW (July 22, 2008 at 10:53 pm)
I have gathered everything to create this project but the projector I'm using is fairly old. It is bright when used without the LCd but dim when used with, would there be any way to increase the brightness?
fezz911 (July 22, 2008 at 7:35 pm)
darkashan, nice comment. yano how this guys uning a 15" LCD, where does the scart leads go and stuff so you can play games on it?x
Kori114 (July 21, 2008 at 12:11 pm)
Bad ASS!!!!
darkrashan (July 20, 2008 at 12:25 am)
For people who don't understand how the light "passes through the lcd" its quite simple...In the back of the lcd theres a light.. which is fine for looking at up close, but nowhere near b right enough to project.If you remove the light and the panel that holds it to the LCD, light will pass through as the LCD is CLEAR/TRANSPARENT.I think I'm going to build this soon.. I can build this FAR CHEAPER than the cost of a replacement bulb on a vid projector...
darkrashan (July 20, 2008 at 12:21 am)
$50 w/ parts off ebay.. 3 pack of replacement lightbulbs about $5 + shipping...or $400+ for a vid projector, and $200+ / lightbulb to replace (both average about 2000 hrs run time)
squareflat (July 16, 2008 at 11:35 am)
u r so smart!!!!
mandypjackson (July 15, 2008 at 8:35 pm)
most lcd screens are unsuitable for this application as the pcb cant be moved out the way of the back of the lcd panel. but it will work, ive tried it |
